Stage Controller

MC-CQ-B

Single Axis

Features:

RoHS Compliant
CE Marked
Integrated Controller and Amplifier
Small footprint
Easy to use RS-232 Serial Interface
Linkable to multiple Control Units
Single-Axis becomes Multi-Axis
Includes Software Application Development Interface

View Drawing

DC power input with secure lock-on connection
Easy access fuse
Front access ON/OFF power switch
Controller provides Velocity and Position Mode closed-loop control w/programmable speed and acceleration and a rich Command-Set
Clean-and-Simple-Connectivity facilitates Rapid Development
Optional 2, 4, 8 or 16 port USB to RS-232 Expansion Module (Plug 'n Play)

Order Online

Part Number: MC-CQ-B

Unit Price: $1690

Total Price: $

Qty:

MC-5CD Controller

Supply Voltage: 12-30 Vcd
PWM Switching Frequency: 78.12 KHz
Efficiency: 95%
Max Continuous Motor Current: 6 A with sufficient conductors for motor connection 1A with 28 gauge ribbon cable
Max Peak Motor Current: 10 A with sufficient conductors for motor connection and sufficient power supply current. 2 A with 28 gauge ribbon cable.
Controller Current Consumption: 60 mA (w/no Motor, Encoder, or Limit Switch Current)
5 Volt Outputs: 50 mA (Max Combined Load from Encoder Vcc and Limit Vcc)
Limit Switch Configuration: Switches to ground expected (Controller incorporates 1 K pull-up resistors to 5 V.
Limit Switch Logic Levels: Low 0-0.5 V, High 4.0-5.0 V
Encoder Input Maximum Frequency: 400 Hz
Maximum Motor Velocity: 30,000 rpm (do not exceed stage speed rating)
Baud Rate: 600, 1200, 2400, 4800, 9600, 19,200, 38,400, 57,600, 115,200
Serial EEPROM Program Memory: 36656 Bytes
Operating Temperature: 0 to 70°C
Storage Temperature: -25 to +85°C

The information contained on this website is subject to change without notice. Critical dimensions or specifications should be verified with our technical support staff.

Manual Stages

Motorized Stages

Stage Controllers

Download Manual

Cart

Part #	Unit $	Qty	Edit

Total: $0.00

Review