Manual Stages
Manual MicroMini™ Stage
FEATURES
Goniometers are used to achieve precision angular position of an object about a fixed point located above the center of the mounting surface. Typical use would be for precision alignment of fiber optics and for beam steering applications.
When ordering multi-axis units the completed assembly will include all necessary braces, kits and hardware
GENERAL DATA:
GENERAL PRECISION
Product Selector
Select Radius
3D models available
|
|
|
Model No. | MM-3GF-25 | MM-3GF-42 |
---|---|---|
Radius: | 25 mm | 42 mm |
Travel: | ±0.175 rad nominal | ±0.175 rad nominal |
Sensitivity: (per lead screw rotation): | 211.4 µrad | 211.4 µrad |
Center of Rotation: (from top surface): | 14.2 (mm) | 32 (mm) |
Moment Load | 6 to 12 oz-in (42 to 84 mNm) |
6 to 12 oz-in (42 to 84 mNm)/td> |
LOAD CAPACITY | ||
Direct Top Load: | 0.45 kg (16 oz) | 0.45 kg (16 oz) |
Pitch: | 6 oz-in (42 mNm) | 6 oz-in (42 mNm) |
Roll: | 6 oz-in (42 mNm) | 6 oz-in (42 mNm) |
Yaw: | 12 oz-in (84 mNm) | 12 oz-in (84 mNm) |
Dimensions: L x W x H (mm), not including lead screw extension
Model No. | MM-2CR | MM-2CRB |
---|---|---|
-X (1 axis) Weight: |
66 x 19.1 x 21.6* (mm) 38 g |
66 x 19.1 x 21.6* (mm) 38 g |
-XY (2 axis) Weight: |
66 x 19.1 x 43.2* (mm) 77 g |
66 x 19.1 x 43.2* (mm) 77 g |
*At full extended height
The information contained on this website is subject to change without notice. Critical dimensions or specifications should be verified with our technical support staff.
Manual Stages
Motorized Stages