Motorized Stage
Extended Motorized MicroMini™ Stages
FEATURES
When ordering multi-axis units the completed assembly will include all necessary braces, kits and hardware
GENERAL DATA:
GENERAL PRECISION
Stage Configurator
Select Configuration
| Model No. | Travel Range | Stage Body (L x W xH) | Weight |
|---|---|---|---|
| MM-4M-EX-X-TR2 | 48 mm | 186.1 x 31.5 x 25.4 (mm) | 330 g |
| MM-4M-EX-XY-TR2 (2 axis) | 48 mm | 186.1 x 183.1 x 50.8 (mm) | 662 g |
| MM-4M-EX-XZ-TR2 (2 axis) | 48 mm | 186.1 x 31.5 x 234.4 (mm) | 762 g |
| MM-4M-EX-XYZ-TR2 (3 axis) | 48 mm | 186.1 x 183.1 x 259.8 (mm) | 1094 g |
| MM-4M-EX-X-TR4 | 78 mm | 216.1 x 31.5 x 25.4 (mm) | 345 g |
| MM-4M-EX-XY-TR4 (2 axis) | 78 mm | 216.1 x 213.1 x 50.8 (mm) | 692 g |
| MM-4M-EX-XZ-TR4 (2 axis) | 78 mm | 216.1 x 31.5 x 264.4 (mm) | 792 g |
| MM-4M-EX-XYZ-TR4 (3 axis) | 78 mm | 216.1 x 213.1 x 298.8 (mm) | 1139 g |
| MM-4M-EX-X-TR5 | 108 mm | 246.1 x 31.5 x 25.4 (mm) | 360 g |
| MM-4M-EX-XY-TR5 (2 axis) | 108 mm | 246.1 x 243.1 x 50.8 (mm) | 722 g |
| MM-4M-EX-XZ-TR5 (2 axis) | 108 mm | 246.1 x 31.5 x 294.4 (mm) | 822 g |
| MM-4M-EX-XYZ-TR5 (3 axis) | 108 mm | 246.1 x 243.1 x 319.8 (mm) | 1184 g |
| MM-4M-EX-X-TR6 | 138 mm | 276.1 x 31.5 x 25.4 (mm) | 375 g |
| MM-4M-EX-XY-TR6 (2 axis) | 138 mm | 276.1 x 273.1 x 50.8 (mm) | 752 g |
| MM-4M-EX-XZ-TR6 (2 axis) | 138 mm | 276.1 x 31.5 x 325.4 (mm) | 852 g |
| MM-4M-EX-XYZ-TR5 (3 axis) | 138 mm | 276.1 x 273.1 x 350.8 (mm) | 1229 g |
| Speed/Resolution | Max. Travel Rate | Resolution | GH Ratio | TPI |
|---|---|---|---|---|
| SPRS1 | 7.6714 mm/sec | 0.3596 µm/count | 14:1 | 80 |
| SPRS2 | 2.4658 mm/sec | 0.1156 µm/count | 43:1 | 80 |
| SPRS6 | 1.5982 mm/sec | 0.0749 µm/count | 66:1 | 80 |
| Specifications: | MM-4M-EX |
|---|---|
| *Repeatability: | 1 µm |
| *Homing Repeatability: | 1 µm |
| *Accuracy (linearity): | 2 µm/25.4 (mm) of travel |
| Straightness: | 4 µm maximum deviation per 50 mm of travel |
| Speed (for standard gearhead ratio): | 7.5 mm/sec max @ 12 V (GH=64:1 TPI=80) |
| Slider Backlash (max overshoot): | 1 µm |
| Gearhead Backlash: | < 2 µm, can be compensated in software without overshoot |
| *Encoder Conversion (resolution): |
0.3595 µm per count (GH=14:1 TPI=80) (download resolution data sheet) |
|
*Encoder resolution must be added based on the
gearhead. NOTE: Gearhead ratios of 66:1 incur a 6 to 8 week delivery. |
|
| Motor: |
13 mm diameter, 6-12 Vdc servo, brush type (see motor spec sheet) |
| Slide: | Recirculating ball bearings with four point contact, hardened stainless steel rails |
| LOAD CAPACITY: | |
| Direct Top Load: | 3.0 kg (106 oz) |
| Push | 1 kg (35 oz) |
| Vertically mounted: | 1 kg (35 oz) |
| Side: | 1.5 kg (53 oz) |
| Pitch: | 58 oz-in (410 mNm) |
| Roll: | 73 oz-in (515 mNm) |
| Yaw: | 69 oz-in (487 mNm) |
The information contained on this website is subject to change without notice. Critical dimensions or specifications should be verified with our technical support staff.
Manual Stages
Motorized Stages
